•MANUFACTURED 3/5/2018 Complete bedside care center features reversible bassinet and changer all-in-one • Extended use changer allows for more diaper changes, up to 30 lb • With two speeds of vibration to choose from, you can find just the right setting to soothe baby • With four locking wheels the bassinet can be effortlessly maneuvered throughout the home allowing baby to be wherever you are • The canopy offers shade from light while the two soft toys give baby a focal point for playtime

Some attach to the longer top rail—you have to remove them to get them out of the way. Others simply rest on the long rails and are hinged at one shorter side rail so the changing station can be flipped over the rail to hang at the outer side of the play yard. We think it's safer to remove the changing table when not in use so it is out of reach of your baby and any other children. In addition, it is always better to have an active means of attachment to the frame—that is you have to click, snap, button, or strap a changing table or bassinet into place rather than just have it resting on a frame.
• Always follow the manufacturer's instructions for assembly, and double-check that all latching features and hinges on the play yard are in place and secure. Before using a play yard, confirm that all top rails and the center floor are locked in position; the floor pad should also be in place. Never put your baby in a play yard with the sides down. Keep your owner's manual for future reference.
I used this playpen at work for a year. Purchased when my daughter was almost a year old. I had to take it in and out of my car everyday at work and I was worried that it wouldn't hold up due to it being hollow plastic. I was pleasantly surprised! It held up so well that I will be able to use it again for the next baby. My daughter is now two and knows how to stack things so she can climb out and she's tall. However she has never been able to figure out how to unlock the gate. All the toys on the toy panel still work and have held up despite my daughter being rough with them. None of the connector pegs have come off during transport. I really worried they would pop off since they weren't solid and were jostled in my car all the time!
Some attach to the longer top rail—you have to remove them to get them out of the way. Others simply rest on the long rails and are hinged at one shorter side rail so the changing station can be flipped over the rail to hang at the outer side of the play yard. We think it's safer to remove the changing table when not in use so it is out of reach of your baby and any other children. In addition, it is always better to have an active means of attachment to the frame—that is you have to click, snap, button, or strap a changing table or bassinet into place rather than just have it resting on a frame.

In search of insight, Romper spoke with Dr. Marcie Beigel, a behavior specialist with over 20 years of experience. For Dr. Marcie, it's all about being intentional. If your kid throws a tantrum every time she gets in the playpen, she associates the space with being upset. Likewise, it doesn't matter how well you've stocked your playpen with toys if every time she gets in it, mom disappears. If you want to change the pattern here, "you have to make the space really fun and delicious and enjoyable," says Dr. Marcie.
Just like previous posters have stated the only thing that I ever really had a problem with are the stickers! I ripped a few of the bears putting them on. And when my daughter learned how to pinch things she pulled off any sticker that was on the inside. However, the shiny stickers held up and stick better than the others! Also the ramps at the gate came off due to the constant in and out of the trunk. They did not break just popped off and I never put them back on.
Nice to keep baby out of trouble at home. Once he became mobile we had to do an "upgrade" as we noticed he was starting to hit his head on the X shaped metal bars. We tried some alternatives but the best so far was wrapping the metal bars with pool noodles (see picture). You'll need 8 pool noodles and some cuts (buy some extra in case you mess up). Use 2/3 of a pool noodle to wrap the internal bars and the remaining 1/3 to wrap half of the external bar. The pieces will also need a longitudinal cut along the length to fit the bar in. You'll also need some small cuts in the middle of the longer piece to fit the center rivet, where the mesh is attached to the bars. We got the pool noodles at the dollar store nearby for less than $10 and since ... full review
×