Absolutely beautiful playard baby is due next month and this has all the essentials I need to make it an easier time. At $118 I really couldn't turn this down I haven't used the electronic parts yet as I need batteries (D battery for bouncer and AA for the one on the rail) all in all I would buy this again if I ever need a new one 😍 The may for this is super soft and comfortable for any baby
This is a simple and colorful playpen that you can place at any spot of your choice to make a quick, safe playing enclosure for your baby. The six panels of the playpen latch firmly to one another. They can also be extended to increase the play area with two additional panels sold separately. The base pads do not slip, thus grounding the playpen firmly.
• You don't need a sheet. Most play yard mattresses, which are thin, can be cleaned, and the bassinet is safer without this extra piece of material, in which a baby could become entrapped. But if you do use one, make sure it is tight-fitting and specifically made for the mattress or bassinet insert on your model. Never use a sheet made for a crib mattress or twin or other size bed.
A playard, otherwise known as a playpen, makes a great portable travel crib for your infant or toddler. Take naptime to go, whether it's at grandma's house or a caretaker facility, playards are easy to set-up and taken down when they're needed. Playards enclose play and nap spaces for baby for safety. A number of accessory options are available including bassinets, changing tables, music mobiles and storage options.
Bassinets and changing-table inserts can be useful. Just remember that you should never leave your child unattended within those devices in a play yard—no matter what type (or feature) you are using. Your infant may be content to sleep in her bassinet insert, but she's safest sleeping in a full-sized crib. That's because your child may begin moving around and could fall out of the bassinet, either onto the floor, or to the floor of the play yard, causing injury. You'll also need to remove the bassinet or changing station, (or flip the changing station to the outside of the yard, depending on the model) when your baby is in the main part of the play yard to avoid the possibility of the child getting trapped under those attachments.
Entertaining a baby can be a lot harder than you think. The fact of the matter is, we've come a long way from when jingling your keys was going to cut it. Still, as you pick out various playpens and other areas for your child to play in, it's important that you keep a few key factors in mind. Obviously, safety is at the top of the list, along with comfort, price and style. Luckily, shopping this extensive variety of products will mean that you never need to compromise on any of these.
If you expect to frequently move your play yard from room to room, check its dimensions before you buy. Many interior doorways are only 30 inches wide—no problem for the 28-inch width of most basic models. But many deluxe models are wider—the Graco mentioned above, for example, would be a tight squeeze at 28.8 inches wide. Just be aware that you might find yourself folding a deluxe model to move it around inside the house.

Entertaining a baby can be a lot harder than you think. The fact of the matter is, we've come a long way from when jingling your keys was going to cut it. Still, as you pick out various playpens and other areas for your child to play in, it's important that you keep a few key factors in mind. Obviously, safety is at the top of the list, along with comfort, price and style. Luckily, shopping this extensive variety of products will mean that you never need to compromise on any of these.

A division of Dorel Juvenile Products, Safety 1st entered the juvenile market in 1984 with its now classic and internationally recognized "Baby on Board" sign. Fueled by the immediate success of the sign, the company claimed a market niche in child safety and became the first brand to develop a comprehensive line of "childproofing" products. Available everywhere juvenile products are sold, and online.
Our one year old is cruising and taking his first steps. we wanted to create a safe space for him and some peace of mind for us. The product is fairly easy to put together. we wanted to cordon off a section of the house, so we were able to set this up in our family room. The panels come with suction cups that adhere to the floor for stability. We were able to use half the panels in the family room and the other panels we intend to use to section off the hallway. The panels have no sharp edges, and are lightweight so were they to fall they would not cause any harm.

Those looking for a pack 'n play that can go from newborn to toddler should shop for an option that comes with features like a changing attachment and a napper for the baby since it is one purchase for three items. This favorite from Graco gives you all of these and it can be customized as time goes on. Use the removable vibrating seat when baby watches you clean the dishes, while the changing pad can act as your everyday diaper station if this pack 'n play is the main fixture in your house. This is not the lightest of option on this list coming in at 32 pounds with all of the attachments, but it can fold up nicely and be moved. So, those looking to take something on an airplane might be better suited with our travel pick. 
Only had a little while, but really not worth the money. Very flimsy can’t even lean against it when sitting in it. I bought it so I could let my son play while I did things near by; however I can not leave him unattended bc the way it’s made has perfect slots for them to be able to put feet in and climb up. Material is hollow plastic so it squishes also if pressed hard.
To avoid potentially fatal entrapment between the station and the yard's top rail, never put your baby in a play yard that has the changing table in place. Removing the table also eliminates the possibility of entrapment by any loop from the changing-table restraint strap, although no loops should be present in a play yard that is said to meet safety standards set by ASTM International.
So I bought this through Amazon for my first child when he was around 6 months because I felt the portable playards were akin to baby jail. I love this product. Customizable, bright colors, sturdy, durable easy to clean. So when I started using it for my 2nd around the same time, I had full faith in this product. I never put the. Stickers on as per other reviewers recommendations because they peel off easily, so when I went to pick up my son and saw him chewing something, I was a bit surprised. It was blue plastic. I looked around at the toys, and couldn't figure where it came from. Then i took a panel off and shook it and out fell some plastic pieces from the drill holes. Apparently one should shake panels out before using to remove the plastic pieces that came off during production. Can def be a choking hazard, you might not even notice they fall out when using the gate.

Be sure to check the floor pad. It should also be no more than 1-inch thick, snug-fitting, and firm enough to protect your baby from falling or rolling into the loose mesh pocket that can form between the edge of the floor panel and side of the play yard (a suffocation hazard). We think it's safer when models have slots on the floor that allow the mattress's Velcro strips to be inserted and secured on the outside of the play yard, making it difficult for a baby or toddler to lift the mattress and possibly become trapped under it. Avoid models with a mattress that fastens to the bottom of a play yard only with Velcro pads that a child can access from the inside. Use only the mattress or pad that comes with your play yard.
Nice to keep baby out of trouble at home. Once he became mobile we had to do an "upgrade" as we noticed he was starting to hit his head on the X shaped metal bars. We tried some alternatives but the best so far was wrapping the metal bars with pool noodles (see picture). You'll need 8 pool noodles and some cuts (buy some extra in case you mess up). Use 2/3 of a pool noodle to wrap the internal bars and the remaining 1/3 to wrap half of the external bar. The pieces will also need a longitudinal cut along the length to fit the bar in. You'll also need some small cuts in the middle of the longer piece to fit the center rivet, where the mesh is attached to the bars. We got the pool noodles at the dollar store nearby for less than $10 and since ... full review
×